Saturday, April 25, 2020

HALOALKANES AND HALOARENES NOTES

Classification of Halogen Derivatives
On the basis of number of halogen atoms present, halogen derivatives are classified as mono, di, tri, tetra, etc., halogen derivatives, e.g.,
On the basis of the nature of the carbon to which halogen atom is attached, halogen derivatives are classified as 1°, 2°, 3°, allylic, benzylic, vinylic and aryl derivatives, e.g.,
General Methods of Preparation of Haloalkanes
1. From Alcohols
In Groove’s method, ZnC12 is used to weaken the C-OH bond. In case of 3° alcohols, ZnC12 is not required.
The reactivity order of halogen acids is HI > HBr > HCl.
Darzen procedure is the best method for preparing alkyl halides from alcohols since both the by products (SO2 and HCl) are gaseous and escape easily.
2. Free Radical Halogenation of Alkanes
Addition of Hydrogen Halides on Alkenes
1. Finkelstein Reaction
2. Swarts Reaction
H3C – Br + AgF → H3C – F + AgBr
Hg2F2, COF2 and SbF3 can also be used as a reagent for Swarts reaction.
3. Hunsdiecker Reaction
Physical Properties of Haloalkanes
1. Boiling point orders
  1. R – I > R – Br > R – CI > R – F
  2. CH3 – (CH2)2 – CH2Br > (CH3)2 CHCH2Br > (CH3)3CBr
  3. CH3CH2CH2 > CH3CH2X > CH3X
2. Bond strength of haloalkanes decreases as the size of the halogen atom increases. Thus, the order of bond strength is
CH3F > CR3Cl > CR3Br > CH3I
3. Dipole moment decreases as the electronegativity of the halogen decreases.
4. Haloalkanes though polar but are insoluble in water as they do not form hydrogen bonding with water.
5. Density order is
RI > RBr > RCl > RF (For the same alkyl group)
CH3I > C2H5I > C3H7I
Chemical Reactions of Haloalkanes
1. Nucleophilic Substitution Reactions (SN reactions)
kCN is predominantly ionic and provides cyanide ions in solution, which is ambident nucleophile and bind with carbon side to form as the major product, while AgCN is covalent and form isocyanide as the major product.
Like KCN, KNO2 form R-ONO while AgNO2 produces R-NO2 as product. Vinyl chloride is less reactive towards nucleophilic substitution reactions due to resonance.
Nucleophilic substitution reactions are of two types
(a) SN1 type (Unimolecular nucleophilic reactions proceed in two steps:
Rate, r = k [RX). It is a first order reaction.
Reactivity order of alkyl halide towards SN1 mechanism
3° > 2° > 1°
Polar solvents, low concentration of nucleophiles and weak nucleophiles favour SN1 mechanism.
In SN1 reactions, partial racemisation occurs due to the possibility of frontal as well as backside attack on planar carbocation.
(b) SN2 type (Bimolecular nucleophilic substitution) These reactions proceed in one step and is a second order reaction with r = k[RX] [Nu].
During SN2 reaction, inversion of configuration occurs (Walden inversion) i.e., starting with dextrorotatory halide a laevo product is obtained and vice-versa, e.g.,
Reactivity of halides towards SN2 mechanism is
1° > 2° > 3°
Rate of reaction in SN2 mechanism depends on the strength of the attacking nucleophile. Strength of some common nucleophiles is
:CN > : I > : OR > : OH > CH3COO: > H2O > F
Non-polar solvents, strong nucleophiles and high concentration of nucleophiles favour SN2 mechanism.
Relative rates of some alkyl halides in SN1 and SN2 reactions are in the order
Resonating structure of benzyl carbocations are
Relative reactivity of alkyl halides for same alkyl group is
RI > RBr > RCI > RF
2. Elimination Reactions
Dehydrohalogenation is a β – elimination reaction in which halogen is from α-carbon atom and the hydrogen from the α-carbon according to Saytzeff rule, e.g.,
Ease of dehydrohalogenation among halides
3° > 2° > 1°
3. Reduction
4. Reaction with Metals
Grignard reagent is never isolated in the solid state as it explodes in dry state. So it is used as ethereal solution.
5. lsomerisation
General Methods of Preparation of Aryl Halides
1. By Halogenation of Aromatic Hydrocarbons
It is an electrophilic substitution reaction.
2. By Side Chain Halogenation
(It involves free radical mechanism.)
3. From Benzene Diazonium Salt
4. From Phenol
Physical Properties of Aryl Halides
1. Aryl halides are colourless liquids or colourless solids with characteristic odour.
2. Boiling point generally increases with increase in the size of aryl group or halogen atom. Boiling point order
Ar – I > Ar – Br > Ar – Cl > Ar – F
3. The melting point of p -isomer is more than 0- and m-isomer.
This is because of more symmetrical nature of p-isomer.
4. Due to resonance in chlorobenzene, C-CI bond is shorter and hence, its dipole moment is less than that ofcyclohexylchloride.
Chemical Properties of Aryl Halides
1. Nucleophilic Substitution Reaction
Aryl halides are less reactive towards nucleophilic substitution reaction. Their low reactivity is attributed due to the following reasons:
  1. Due to resonance, C-X bond has partial double bond character.
  2. Stabilisation of the molecule by delocalisation of electrons.
  3. (Instability of phenyl carbocation.
However, aryl halides having electron withdrawing groups (like – NO2, -SO3H, etc.) at ortho and para positions undergo nucleophilic substitution reaction easily.
Presence of electron withdrawing group (-NO2) increases the reactivity.
2. Electrophilic Substitution Reactions
Halogens are deactivating but O, p-directing. Thus, chlorination, nitration, sulphonation and Friedel Craft’s reaction give a mixture of o- and P- chloro substituted derivatives.
(i) Halogenation
(ii) Nitration
(iii) Sulphonation
(iv) Friedel-Crafts reaction
3. Reaction with Metals
(i) Wurtz Fittig reaction
(ii) Fitting reaction
(iii) Ullmann reaction
Dlhalogen Derivatives
Dichloromethane (CH2Cl2) is widely used as a solvent, as a propellant in aerosols. Direct contact of dichloromethane in humans causes intense burning and milk redness of the skin.
Trihalogen Derivatives
1. Chloroform [Trichloromethane, CHCl3]
Methods of preparation
Properties
1. Oxidation of CHCl3 gives poisonous gas phosgene (carbonyl chloride).
To avoid this oxidation CHCl3 iI .toreci in dark brown bottles and filled to the brim. 1% ethanol is added to chloroform which converts harmful phosgene gas into diethyl carbonate.
2. CHCl3 is widely used in the production of freon refrigerant R-22.
3. On nitration, it gives tear producing insecticide substance chloropicrin.
2. Iodoform (tri-iodornethane, CHl3)
Iodoform is prepared by iodoform reaction.
Compounds containing either CH3CO- or CH3CH(OH) group form yellow colour iodoform with I2 and NaOH.
Iodoform when comes in contact with organic matter, decomposes easily to free iodine, an antiseptic. Due to its objectionable smell, it has been replaced by other formulations containing iodine.
Polyhalogen Derivatives
1. Tetrachloromethane (Carbon Tetrachloride, CCl4 )
Preparation
CCI4 is a colourless, non-inflammable, poisonous liquid, soluble in alcohol and ether.
Uses
Carbon tetrachloride is used
  1. as a solvent for oils, fats, resins
  2. in dry cleaning
  3. as fire extinguisher under the name ‘pyrene’.
2. Freons
The chlorofluorocarbon compounds of methane and ethane are collectively known as freons. These are usually produced for aerosol propellants, refrigeration and air conditioning purposes. Carbon tetra chloride when reacts with antimony trifluoride in the presence of SbClas catalyst, dichlorofluromethane (freon) is obtained.
3. DDT (p, p’-Dichlorodiphenyltrichloroethane)
DDT is the first chlorinated organic insecticide. Its stability and fat solubility’is a great problem.
It is prepared from chloral and chlorobenzene in the presence of conc. H2SO4·
4. Perchloroethane (C2Cl6)
It is used as moth repellant and is also known as artificial camphor.

No comments:

Post a Comment

BIOMOLECULES CHEMISTRY CLASS 12

                           BIOMOLECULES ( CHEMISTRY )        Carbohydrates:  Polyhydroxy aldehydes or polyhydroxy ketones or compounds on hy...