Kinematics in One Dimension
Definition of a vector
A vector is a physical quantity with direction as well as magnitude, for example, velocity or force. In contrast, a quantity that has only magnitude and no direction, such as temperature or time, is called a scalar. A vector is commonly denoted by an arrow drawn with a length proportional to the given magnitude of the physical quantity and with direction shown by the orientation of the head of the arrow.
Displacement and velocity
Imagine that a car begins traveling along a road after starting from a specific sign post. To know the exact position of the car after it has traveled a given distance, it is necessary to know not only the miles it traveled but also its heading. The displacement, defined as the change in position of the object, is a vector with the magnitude as a distance, such as 10 miles, and a direction, such as east. Velocity is a vector expression with a magnitude equal to the speed traveled and with an indicated direction of motion. For motion defined on a number line, the direction is specified by a positive or negative sign. Average velocity is mathematically defined as
Note that displacement (distance from starting position) is not the same as distance traveled. If a car travels one mile east and then returns one mile west, to the same position, the total displacement is zero and so is the average velocity over this time period. Displacement is measured in units of length, such as meters or kilometers, and velocity is measured in units of length per time, such as meters/second (meters per second).
Average acceleration
Acceleration, defined as the rate of change of velocity, is given by the following equation:
Acceleration units are expressed as length per time divided by time such as meters/second/second or in abbreviated form as m/s 2.
Graphical interpretations of displacement, velocity, and acceleration
The distance versus time graph in Figure
Figure 1
Motion of a walking person.
Each segment in the velocity versus time graph in Figure
The more realistic distance‐versus‐time curve in Figure
Motion of a car: (a) distance, (b) velocity, and (c) acceleration change in time.
Instantaneous velocity can be read on an odometer in the car. It is calculated from a graph as the slope of a tangent to the curve at the specified time. The slope of the line sketched at 4 seconds is 6 m/s. Figure
For example, at time t = 10 s, the displacement is 47 m, the velocity is −5 m/s, and the acceleration is −5 m/s 2.
Definitions of instantaneous velocity and instantaneous acceleration
The instantaneous velocity, by definition, is the limit of the average velocity as the measured time interval is made smaller and smaller. In formal terms, . The notation means the ratio is evaluated as the time interval approaches zero. Similarly, instantaneous acceleration is defined as the limit of the average acceleration as the time interval becomes infinitesimally short. That is, .
Motion with constant acceleration
When an object moves with constant acceleration, the velocity increases or decreases at the same rate throughout the motion. The average acceleration equals the instantaneous acceleration when the acceleration is constant. A negative acceleration can indicate either of two conditions:
- Case 1: The object has a decreasing velocity in the positive direction.
- Case 2: The object has an increasing velocity in the negative direction.
For example, a ball tossed up will be under the influence of a negative (downward) acceleration due to gravity. Its velocity will decrease while it travels upward (case 1); then, after reaching its highest point, the velocity will increase downward as the object returns to earth (case 2).
Using v o (velocity at the beginning of time elapsed), v f (velocity at the end of the time elapsed), and t for time, the constant acceleration is
Substituting the average velocity as the arithmetic average of the original and final velocities v avg = ( v o + v f )/2 into the relationship between distance and average velocity d = ( v avg)( t) yields.
Substitute v f from Equation
Finally, substitute the value of t from Equation
These four equations relate v o , v f , t, a, and d. Note that each equation has a different set of four of these five quantities. Table
A special case of constant acceleration occurs for an object under the influence of gravity. If an object is thrown vertically upward or dropped, the acceleration due to gravity of −9.8 m/s 2 is substituted in the above equations to find the relationships among velocity, distance, and time.
No comments:
Post a Comment